1、如何將Win7做為NTP伺服器
1
2、如何將Win7做為NTP伺服器
1. 修改注冊表項
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpServer
Enabled 設定為 1(默認0)
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\
AnnounceFlags 設定為 5 (默認 10)
Value
Meaning
0
Timeserv_Announce_No, Reliable_Timeserv_Announce_No. The domain controller does not advertise time service.
1
Timeserv_Announce_Yes. The domain controller always advertises time service.
2
Timeserv_Announce_Auto. The domain controller automatically determines whether it should advertise time service.
4
Reliable_Timeserv_Announce_Yes. The domain contoller will always advertise reliable time service.
8
Reliable_Timeserv_Announce_Auto. The domain controller automatically determines whether it should advertise reliable time service.
2. 禁用防火牆或設置例外,UDP 123埠。
3. 運行 services.msc,將Windows Time服務設置成自動(延遲啟動)
Win7下如果設置成自動,下次重啟後此服務會被停止,原因不詳。
經實驗,延遲啟動也並不需要用戶登錄即可啟動。
4. 重啟動校時服務:net stop w32time && net start w32time
網路設備(如cisco、h3c交換機……)不能正常同步NTP伺服器時間:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\LocalClockDispersion
值修改為0 (默認為0x0000000a)
3、如何將Win7做為NTP伺服器
如何將Win7做為NTP服務內器容
http://jingyan.網路.com/article/6f2f55a1814eadb5b93e6cbe.html
4、win7設置NTP伺服器,急,在線等
?
5、win7設置NTP伺服器,急,在線等
win7不是自帶了一個時間同步的功能嗎?幹嘛還要自己安裝? 如果是要做內網的NTP的話,指定Ip地址不就行了。這個軟體還真沒用過
6、怎樣把WINDOWS7設置成NTP時間伺服器
好像在時間設置里,直接網路吧,答案有圖有文子,更清楚
7、如何將Win7做為NTP伺服器
如何將Win7做為NTP伺服器win7 64位是自帶NTP服務的,默認情況下只有NTPClient啟用,NTPServer是沒有啟用,需要手動修改注冊表來配置。
8、如何將Win7做為NTP伺服器
1. 修改注冊表項
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpServer
Enabled 設定為 1(默認0)
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\
AnnounceFlags 設定為 5 (默認 10)
Value
Meaning
0
Timeserv_Announce_No, Reliable_Timeserv_Announce_No. The domain controller does not advertise time service.
1
Timeserv_Announce_Yes. The domain controller always advertises time service.
2
Timeserv_Announce_Auto. The domain controller automatically determines whether it should advertise time service.
4
Reliable_Timeserv_Announce_Yes. The domain contoller will always advertise reliable time service.
8
Reliable_Timeserv_Announce_Auto. The domain controller automatically determines whether it should advertise reliable time service.
2. 禁用防火牆或設置例外,UDP 123埠。
3. 運行 services.msc,將Windows Time服務設置成自動(延遲啟動)
Win7下如果設置成自動,下次重啟後此服務會被停止,原因不詳。
經實驗,延遲啟動也並不需要用戶登錄即可啟動。
4. 重啟動校時服務:net stop w32time && net start w32time
網路設備(如cisco、h3c交換機……)不能正常同步NTP伺服器時間:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\LocalClockDispersion
值修改為0 (默認為0x0000000a)
9、怎樣把WINDOWS7設置成NTP時間伺服器
1. 修改注冊表項
HKEY_LOCAL_
Enabled 設定為 1(默認0)
HKEY_LOCAL_
AnnounceFlags 設定為 5 (默認 10)
2. 禁用防火牆或設置例外,UDP 123埠。
3. 運行 services.msc,將Windows Time服務設置成自動(延遲啟動)
10、windows怎麼啟動NTP服務
Network Time Protocol(NTP)是用來使計算機時間同步化的一種協議,它可以使計算機對其伺服器或時鍾源內(如石英鍾,容GPS等等)做同步化,它可以提供高精準度的時間校正(LAN上與標准間差小於1毫秒,WAN上幾十毫秒),如果只是啟動服務的話右鍵計算機--管理----服務和應用程序-服務,找到windows Time服務啟動即可