tomcat服务器默认端口

1、如何修改tomcat的默认端口为80

首先我们需要找到Tomcat目录下面的Conf文件夹。找到server.xml文件，内将其打开。
找到
<Connector connectionTimeout="20000" port="8080" protocol="HTTP/1.1" redirectPort="8443"/>这句话
只需要将这个8080修改为容80即可
修改成功后，重新启动服务器。看看，只需要输入localhost即可访问Tomcat主页了。

2、关于Tomcat服务器的端口

把标注的时间设置到1000

3、谁知道tomcat如何更改默认端口号？

打开tomcat所在的conf文件夹的server.xml文件；找到等代码，将8080改为自己想改的端口，并保存退出；修改后，重启tomcat就可以了。

4、如何修改tomcat服务器的端口

1、成功安装JDK和Tomcat（如果这一步有问题，可查看我的相关经验！）；
2、定位到Tomcat的安装目录：右键单击Tomcat，选择“属性”，单击“打开文件所在位置”：
3、在目录“Tomcat7.0\conf”下找到“server.xml”文件，用VS或者其他能解译xml文件的工具打开：
4、找到代码port=”8080”，将8080修改为80后，单击“保存”即可完成修改：
5、修改完成后需要重新启动一下服务器：先单击stop停止服务器，再单击start开启服务器：
6、重新开启服务器后打开浏览器，在地址栏中输入”http://localhost”并按回车键后显示如下：

5、如何修改tomcat 默认端口？

首先我们需要找到Tomcat目录下面的Conf文件夹。找到server.xml文件，将其打开。
找到
<Connector connectionTimeout="20000" port="8080" protocol="HTTP/1.1" redirectPort="8443"/>这句话
只需要将这个回8080修改为80即可
修改成答功后，重新启动服务器。看看，只需要输入localhost即可访问Tomcat主页了。

6、tomcat作为服务器的端口号多少

如何修改Tomcat的端来口号 Tomcat的默认端口号为自8080，假如我们使用服务器安装Tomcat，使用网址访问的时候，总是需要在后面加上8080端口，如何修改端口号。让其和其他的网站一样，直接输入网址即可访问呢？ 方法/步骤 首先我们需要知道，http的默

7、TomCat服务器的默认端口号是?,为了解决中文乱码问题，需要对TomCat的配置做什么修改？

默认端口号 是 8080
解决中文乱码:
找到你的tomcat 目录/conf/server.xml

这个文件 找到 <Connector port="8080" 这个地方 ,这个标签版 加上 URIEncoding="UTF-8" 属性

注 :URIEncoding 的值 和你项目的jsp编码权,以及你项目中过滤器 保持一致 即可

比如你项目中 中文过滤器使用的是 GBK 或者GB1312. 那么URIEncoding 设置成 GBK 或者GB1312

8、怎么修改tomcat服务器的默认的8080端口

Tomcat服务器安装的时候默认的端口设置是8080，通常我一看到端口是8080的网站，我就猜测服务器估计是Tomcat，一般来说网站的端口普遍
是80，apache服务器的默认端口就是80，而80与8080端口有一点区别就是，如果你去访问80端口的网站，那么可以直接输入域名访问，而没必要
带上80，因为80是http协议的默认端口；但是，如果是访问8080端口的网站，那么在输入域名以后还要加上8080才行。就是因为这个繁琐的操作，
所以我每次都会修改下端口，修改方法可以参考下面：

（1）首先找到tomcat的安装路径，找到路径conf文件夹下面的server.xml文件，如下图1所示。

图1：server.xml所在路径

（2）用文本编辑器打开server.xml，修改其中端口，文件中端口有很多，比如8005，8080，8009等等，别的都可以不用管，视情况修改就好，我只修改了8080端口为80，直接查找8080替换成80就OK了，修改后的文件内容如下：

<?xml version='1.0' encoding='utf-8'?>
<!--
Licensed to the Apache Software Foundation (ASF) under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The ASF licenses this file to You under the Apache License, Version 2.0
(the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<!-- Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" at this level.
Documentation at /docs/config/server.html
-->
<Server port="8005" shutdown="SHUTDOWN">
<!--APR library loader. Documentation at /docs/apr.html -->
<Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />
<!--Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html -->
<Listener className="org.apache.catalina.core.JasperListener" />
<!-- Prevent memory leaks e to use of particular java/javax APIs-->
<Listener className="org.apache.catalina.core." />
<!-- JMX Support for the Tomcat server. Documentation at /docs/non-existent.html -->
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans." />
<!-- Global JNDI resources
Documentation at /docs/jndi-resources-howto.html
-->
<GlobalNamingResources>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users
-->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" Note: A "Service" is not itself a "Container",
so you may not define subcomponents such as "Valves" at this level.
Documentation at /docs/config/service.html
-->
<Service name="Catalina">

<!--The connectors can use a shared executor, you can define one or more named thread pools-->
<!--
<Executor name="tomcatThreadPool" namePrefix="catalina-exec-"
maxThreads="150" minSpareThreads="4"/>
-->

<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Documentation at :
Java HTTP Connector: /docs/config/http.html (blocking & non-blocking)
Java AJP Connector: /docs/config/ajp.html
APR (HTTP/AJP) Connector: /docs/apr.html
Define a non-SSL HTTP/1.1 Connector on port 8080
-->
<Connector port="80" protocol="HTTP/1.1"
connectionTimeout="20000"
redirectPort="8443" />
<!-- A "Connector" using the shared thread pool-->
<!--
<Connector executor="tomcatThreadPool"
port="8080" protocol="HTTP/1.1"
connectionTimeout="20000"
redirectPort="8443" />
-->
<!-- Define a SSL HTTP/1.1 Connector on port 8443
This connector uses the JSSE configuration, when using APR, the
connector should be using the OpenSSL style configuration
described in the APR documentation -->
<!--
<Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true"
maxThreads="150" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" />
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host).
Documentation at /docs/config/engine.html -->
<!-- You should set jvmRoute to support load-balancing via AJP ie :
<Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1">
-->
<Engine name="Catalina" defaultHost="localhost">
<!--For clustering, please take a look at documentation at:
/docs/cluster-howto.html (simple how to)
/docs/config/cluster.html (reference documentation) -->
<!--
<Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/>
-->
<!-- The request mper valve mps useful debugging information about
the request and response data received and sent by Tomcat.
Documentation at: /docs/config/valve.html -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
<!-- SingleSignOn valve, share authentication between web applications
Documentation at: /docs/config/valve.html -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->
<!-- Access log processes all example.
Documentation at: /docs/config/valve.html -->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs"
prefix="localhost_access_log." suffix=".txt" pattern="common" resolveHosts="false"/>
-->
</Host>
</Engine>
</Service>
</Server>

（3）修改server.xml文件以后，重启tomcat服务器，配置修改成功。

9、TOMCAT服务器的默认端口是什么

8080

10、如何修改tomcat服务器的端口

http://jingyan.baidu.com/article/414eccf6150dc46b431f0afa.html
tomcat的默认抄端口袭是8080，但该端口不是tomcat的唯一端口，可以通过修改tomat的配置文件进行修改，打开tomcat所在的conf文件夹的server.xml文件；
找到<Connector port="8080" ....../>等代码，将8080改为自己想改的端口，这里我改为8088保存退出；
如下图所示，没有修改之前端口是8080；修改后，重启tomcat就用8088端口了。